RSS | Source | License


Table of Contents

Wanderlust is a Emacs email client, I have had enough with Thunderbird and Mail on macOS (Thunderbird uses a ton of RAM and Mail got werid bugs that no one except me seems have encountered, and both of them sucks at searching mails), and apparently Outlook doesn't work on mac, so I'm finally getting my hand dirty with Emacs email client.

1 References

2 Install

You need APEL, FLIM/CLIME, SEMI, in that order, and, of course, wanderlust.

I installed them with my cowboy.el (in the brute force manner), you can just install from melpa.

3 Receive Mail

3.1 Folder

First, config file is ~/.folders, you can change it by wl-folders-file. Here you setup "folders", for wanderlust there is only folder, no account.

Mishoo has a detailed and helpful explanation of this, but for archiving purpose I'll repeat him below.

WL stores the folders information in the file “$HOME/.folders” (dot folders). Here's the syntax for one IMAP folder:

%INBOX:johndoe/clear@mail.domain.com:993! "INBOX"

The above tells WL that we have an IMAP folder (starts with “%”), on the server named “mail.domain.com”, using “clear” (plain) authentication, user name “johndoe”, port “993” and should use secure sockets layer (SSL) when connecting (ends with “!”). Additionally, the string "INBOX" at the end specifies how this folder should be named locally.

P.S. % is IMAP folder, + is local folder, other folders see the manual.

3.2 Grouping

A single folder is not very useful, here is how to setup groups in WL:

   %Inbox:casouri/clear@imap.gmail.com:993!             "Inbox"
   %[Gmail]/All Mail:casouri/clear@imap.gmail.com:993!  "All Mail"
   %[Gmail]/Sent Mail:casouri/clear@imap.gmail.com:993! "Sent"
   %[Gmail]/Starred:casouri/clear@imap.gmail.com:993!   "Starred"
   %[Gmail]/Drafts:casouri/clear@imap.gmail.com:993!    "Draft"
   %[Gmail]/Trash:casouri/clear@imap.gmail.com:993!     "Trash"

And it looks like this in WL:

  [-]GMAIL :0/37/24319
    All Mail:0/0/544

(The Desktop can be changed by variable wl-folder-desktop-name)

It took me a while to sync up the labels in Gmail and my local WL folders.

The part [Gmail]/All Mail is the folder (label in Gmail). I thought that the [Gmail] is some sort of special syntax, turns out it's just how Google name their system labels (folders) in Gmail.

Also you need to make sure you have made these system labels available to SMTP:


3.3 Update: Use fetchmail to Download Mails

Not downloading the mail until I read it sound silly, it's not like I don't read every mail… Plus WL is super slow when fetching mails when I open each mail.

3.3.1 What You Need

fetchmail and postfix.

3.3.2 fetchmail

fetchmail manual

a tutorial

Configure fetchmail with ~/.fetchmailrc.

In the following line:

poll imap.gmail.com protocol IMAP auth password
    user "apprentice@gmail.com" is apprentice here
    password 'klwpcmaqeycndist'
    ssl, sslcertck, idle

(Note: If I use set deamon 60, fetchmail cannot resolve DNS correctly.)

Then change .folder file:

   .inbox             "Inbox"

. means maildir format.

3.3.3 postfix

Open /etc/postfix/main.cf, Add/ucomment there lines:

home_mailbox = Maildir/
mailbox_command =

Also make sure inet_interface is set to loopback-only (

inet_interfaces = loopback-only

So you don't listen to mail comes from places other than fetchmail.

Note that postfix choses mail format between mailbox and maildir depends on whether home_mailbox is a directory or a file (the slash). The name of the directory (or file) can be changed how ever you like.

3.3.4 Use procmail to replace postfix

For some reason I cannot start postfix on my machine. This might be another culprit of macOS Mojave…

Anyway, I then replaced it with procmail.

First change the .fetchmailrc to make it use another MDA:

mda '/usr/local/bin/procmail ~/.procmailrc'

Then configure ~/.procmailrc:

I found a detailed tutorial here. And this is the archived link in case the original broke.


3.4 Update: Use mbsync (isync) to Download Mails

It seems mbsync is faster and easier to configure.

Here is the manual.

Configure ~/.mbsyncrc:

IMAPAccount gmail
# Address to connect to
Host imap.gmail.com
User user@gmail.com
Pass password
# To store the password in an encrypted file use PassCmd instead of Pass
# PassCmd "gpg2 -q --for-your-eyes-only --no-tty -d ~/.mailpass.gpg"
# Use SSL
AuthMechs LOGIN

# The following line should work. If get certificate errors, uncomment the two following lines and read the "Troubleshooting" section.
# CertificateFile /etc/ssl/certs/ca-certificates.crt
#CertificateFile ~/.cert/imap.gmail.com.pem
#CertificateFile ~/.cert/Equifax_Secure_CA.pem

IMAPStore gmail-remote
Account gmail

MaildirStore gmail-local
Path ~/Mail/Gmail/
SubFolders Verbatim
Inbox ~/Mail/Gmail/Inbox

Channel gmail
Master :gmail-remote:
Slave :gmail-local:
# Exclude everything under the internal [Gmail] folder, except the interesting folders
Patterns * ![Gmail]* "[Gmail]/Sent Mail" "[Gmail]/Starred" "[Gmail]/All Mail"
# Or include everything
#Patterns *
# Automatically create missing mailboxes, both locally and on the server
Create Both
# Save the synchronization state files in the relevant directory
SyncState *

IMAPAccount psu
Host outlook.office365.com
User user@psu.edu
Pass password
AuthMechs LOGIN

IMAPStore psu-remote
Account psu

MaildirStore psu-local
Path ~/Mail/PSU/
SubFolders Verbatim
Inbox ~/Mail/PSU/Inbox

Channel psu
Master :psu-remote:
Slave :psu-local:
Patterns "Archive" "Sent Items"
Create Both
SyncState *

Most of the stuff can be found in manual. If you are not sure what folders there are, you can set Pattern to * and retrieve everything. Once you know the name for each folder, you can set specific rules to get only the ones you want.

Note that mbsync is sensitive to empty lines. You got to keep each "block" together.

Fetch your mail by mbsync <account>, e.g. mbsync gmail or mbsync psu. You can set a corn job (linux) or launchd job (macOS) to run it periodically.

3.4.1 Use a Password File instead of plain text

Currently the password of my email account is just lying in the .mbsyncrc, which makes me a bit uncomfortable and I can't put it under (public) version control. However, the tutorial that I based my config on already gave a solution: use a password file.

This way I can manage my config with git, cool.

So the concept is basically create a file with password, encrypt it with gpg, when mbsync needs password, it runs gpg to decrypt the password.

I created gmailpass with my Gmail password in it. Then encrypted it with

gpg -c gmailpass

If you have gpg setup correclty, it should ask you for a password, I just repeated the Gmail password at here because I'm lazy. Then you'll get a gmaipass.gpg file, that's your encrypted password file. Now you can delete the plain text gmailpass.

Then set PassCmd in ~/.mbsyncrc:

IMAPAccount gmail
# Address to connect to
Host imap.gmail.com
User casouri@gmail.com
# To store the password in an encrypted file use PassCmd instead of Pass
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/gmailpass.gpg"

If you run that command gpg -q --for-your-eyes-only --no-tty -d ~/gmailpass.gpg, the password is actually printed back, so you can guess how does that work.

Now you can put ~/.mbsyncrc and password file in your config repo safely.

4 Folder Buffer

Once you start up WL with M-x wl and entered your password, you are in folder mode:

  [-]GMAIL :0/0/307
    All Mail:0/0/0

A couple bindings:

move down/up
next/last folder with unread mail
quit WL
suspend WL
open a folder and go to summary mode
mark all mail as read
toggle child
expand all folders
collapse all folders
quick search

For more bindings, checkout the manual.

5 Summary Buffer

Here you see all your mails:

377  09/16(Wed)11:57 [+1: Takuro Kitame  ] Bug?
381  09/17(Thu)00:16 [+3: Fujikazu Okuni ] elmo-lha.el -- LHA interface
384  09/17(Thu)01:32 [+1: Yuuichi Terani ] wl-0.6.2
389 N09/18(Fri)01:07 [+2: Yuuichi Terani ] wl-0.6.3

The columns are: Message number, Temporal mark, Persistent mark, Date, Sender, Subject.


Toggle folder buffer in the left.
toggle display of message window. I found this important…
move down/up
next/last unread mail
unmark all
go back
view mail, you can still use n/p to go through mails. Keep tapping SPC to go through all unread mails.
toggle thread(conversation)
expand/collapse all thread
toggle important flag
new draft
quit WL
suspend WL
sync with address book
Mark as unread
Mark as read
put refile mark
put copy mark
put dispose mark, the result of disposal is controlled by wl-dispose-folder-alist.
add/remove/change sender to/from/in address book
quick search

More in the manual

5.0.1 Format of summary lines

5.1 Message Buffer

toggle display of summary buffer on the top

6 Send Mail

6.1 Configure

I have two email address, this way I can chose which address I send mails from. Hit C-c C-j in message mode to chose.

;; default template
(setq wl-smtp-connection-type 'starttls
      wl-smtp-posting-port 587
      wl-smtp-authenticate-type "plain"
      wl-smtp-posting-user "casouri"
      wl-smtp-posting-server "smtp.gmail.com"
      wl-local-domain "gmail.com"
      wl-message-id-domain "smtp.gmail.com")
;; multi address
(setq wl-user-mail-address-list '("casouri@gmail.com" "ykf5041@psu.edu"))
(setq wl-template-alist
         (wl-from . "Yuan Fu <casouri@gmail.com>")
         (wl-smtp-posting-user . "casouri")
         (wl-smtp-posting-server . "smtp.gmail.com")
         (wl-smtp-authenticate-type ."plain")
         (wl-smtp-connection-type . 'starttls)
         (wl-smtp-posting-port . 587)
         (wl-local-domain . "gmail.com")
         (wl-message-id-domain . "smtp.gmail.com")
         ("From" . wl-from))
         (wl-from . "Yuan Fu <ykf5041@psu.edu>")
         (wl-smtp-posting-user . "ykf5041@psu.edu")
         (wl-smtp-authenticate-type ."login")
         (wl-smtp-posting-server . "smtp.office365.com")
         (wl-smtp-connection-type . 'starttls)
         (wl-smtp-posting-port . 587)
         ("From" . wl-from))))

You got to set the default config. By default WL doesn't apply any template. Templates are kind of like color themes in Emacs, all they do is override.

Note that I set wl-smtp-authenticate-type to "login" in Outlook mail (Penn State uses Outlook).

6.2 Write Mail

Hit w to start a Draft buffer and go into message mode.


C-c C-j
switch between from addresses
C-c C-k
kill draft
add attachment
C-c C-c
send and exit
C-c C-z
save and exit
C-c C-w
C-c C-t
start editing text
C-c C-f
cc and friends

6.3 Dynamic Modification of Messages

For example:

;; Use the same address to reply
(setq wl-draft-config-alist
      '(((string-match "psu" wl-draft-parent-folder)
         (template . "PSU"))
        ((string-match "gmail" wl-draft-parent-folder)
         (template . "GMAIL"))))

This makes sure I always reply with the address to which the mail was send.

BTW, if it doesn't appear to work, it's because it applies when the mail is sent, as the docstring of wl-draft-config-alist says:

The configuration is applied when ‘wl-draft-config-exec’ is called, or applied automatically before sending message.

The format of wl-draft-config-alist is:

'(("regexp of the header" or elisp expression
  ("Field" . value(elisp expression))
   (variable . value(elisp expression))
   (sub-function . value(elisp expression))
  ("regexp of the header" or elisp expression
   ("Field" . value(elisp expression))

Per default, there are 13 following sub-functions.

'header:      Inserts the specified string at the bottom of the header.
'header-top:  Inserts the specified string at the top of the header.
'header-file: Inserts the specified file at the bottom of the header.
'x-face:      Inserts ‘X-Face:’ field with the content of the specified file.
'top:         Inserts the specified string at the top of the body.
'top-file:    Inserts the specified file at the top of the body.
'body:        Replaces the body with the specified string.
              Specifying nil deletes the entire body string.
'body-file:   Replaces the body with the content of the specified file.
'bottom:      Inserts the specified string at the bottom of the body.
'bottom-file: Inserts the specified file at the top of the body.
'part-top:  Inserts the specified string at the top of the current part.
'part-bottom: Inserts the specified string at the bottom of the current part.
'template:    Applies the specified template.
              (refer to the next subsection)

More in [[http://wanderlust.github.io/wl-docs/wl.html#Dynamical-Message-Re_002darrangement][the manual]

7 Address Book

7.1 bbdb as Address Book

bbdb-v3 supports Wanderlust directly. Get it from savannah.

Emacs Wiki has a tutorial for bbdb-v3 setup for Wanderlust. Emacs-fu also got a detailed tutorial, but his setup is for bbdb-v2. I'll mention the different parts below.

I copied most part from emacs-fu with slight changes:

;; before load
(setq bbdb-file (concat moon-star-dir "utility/email/bbdb"))

;; after load
(require 'bbdb-wl)
(bbdb-initialize 'wl)
 bbdb-wl-folder-regexp    ;; get addresses only from these folders
 bbdb-offer-save 1                        ;; 1 means save-without-asking

 bbdb-use-pop-up t                        ;; allow popups for addresses
 bbdb-electric-p t                        ;; be disposable with SPC
 bbdb-popup-target-lines  1               ;; very small

 bbdb-dwim-net-address-allow-redundancy t ;; always use full name
 bbdb-quiet-about-name-mismatches 2       ;; show name-mismatches 2 secs

 bbdb-always-add-address t                ;; add new addresses to existing...
 ;; ...contacts automatically
 bbdb-canonicalize-redundant-nets-p t     ;; x@foo.bar.cx => x@bar.cx

 bbdb-completion-type nil                 ;; complete on anything

 bbdb-complete-name-allow-cycling t       ;; cycle through matches
 ;; this only works partially

 bbbd-message-caching-enabled t           ;; be fast
 bbdb-use-alternate-names t               ;; use AKA

 bbdb-elided-display t                    ;; single-line addresses

 ;; auto-create addresses from mail
 bbdb/mail-auto-create-p 'bbdb-ignore-some-messages-hook

 ;; don't ask about fake addresses
 ;; NOTE: there can be only one entry per header (such as To, From)
 ;; http://flex.ee.uec.ac.jp/texi/bbdb/bbdb_11.html
 '(( "From" . "no.?reply\\|DAEMON\\|daemon\\|facebookmail\\|twitter")))

And in .wl:

(require 'bbdb)

To make it work for bbdb-v3:

(require 'bbdb-wl)
(bbdb-initialize 'wl)

There is also this tutorial on how to import mac contacts into bbdb, I just don't bother.

7.2 Built in

You can use the built in address book, I don't.

Hit C-c C-a to go into address manager, in address manager:

add CC: mark
add To: mark
add Bcc: mark
cancel the marker
add entry
edit entry
delete entry

In summary mode use @ to add/remove/change sender to/from/in address book.


8 Search Mail

You can use notmuch as a searching backend. To use notmuch:


(setq wl-quicksearch-folder "[]")
(setq elmo-search-default-engine 'notmuch)

And download notmuch and set it up by notmuch new.

Then hit ' to start a quick search.

Here is all the available notmuch searching patterns: manual.

9 Auto Refile

10 Expire rules

The expire rules are based on folders, you specific a time to expire and a destination of expiration, usually trash folder or simply remove.

But what if we don't want to expire the whole buffer? You have filter folders to the rescue :)

expire manual


;; expire
(setq wl-expire-alist
      `((,(concat "/cc:emacs-devel@gnu.org/" (regexp-quote ".~/Mail/Gmail/Inbox")) (date 7) trash)
        (,(regexp-quote ".~/Mail/Gmail/[Gmail]/Trivial") (date 14) trash)))

11 Other

11.1 Save password

Once you entered password, run elmo-passwd-alis-save to save password in=~/.elmo/passwd=. The password is encrypted so don't worry.

11.2 Ignore Crap in Header

(setq wl-message-ignored-field-list
      (append wl-message-sort-field-list
              '("^Reply-To" "^Posted" "^Date" "^Organization")))

11.3 Show folders in Summary Buffer

(setq wl-stay-folder-window t)

11.4 X-Face

Download x-face-e21.el from http://www.jpl.org/ftp/pub/elisp/.

(autoload 'x-face-decode-message-header "x-face-e21")
(setq wl-highlight-x-face-function 'x-face-decode-message-header)

As long as wl-x-face-file exists, WL automatically insert X-Face into header. You can control this behavior by wl-auto-insert-x-face.

12 Funny Quote

From here:

It's a particulary nice setup for offline-usage: whenever there's a network connection, I suck up all the mails and have them available offline.

From here:

Wanderlust (WL) is an email client for Emacs. I stumbled upon it in my never ending search for an email client that doesn't suck. Wanderlust does suck, God it does! — but I'm using it for a few days and I was tricked to think that it sucks less than others.

WL, like other Emacs-based email clients, is not for everyone. Before you get into it, I think you should ask yourself two questions:

Are you an Emacs user? Do you think that all email clients suck? If you answer “yes” to exactly one of these questions, you might want to give WL a chance. “Yes” to both questions means that WL is just what you're looking for. If your answer is “no” to both questions, save yourself some time and stop reading now. ;-)

Written by Yuan Fu <casouri@gmail.com>

First Published on 2018-09-28 Fri 00:00

Last modified on 2018-11-12 Mon 20:02